Table of Contents
Advertisement
Auto Connect on Android OS
1
Open the Wi-Fi settings screen on your Android device and turn on Wi-Fi.
2
Tap [
3
Tap the connection target (the device name) from the list.
Note
The name set on the device appears. You can check the device name in a Configuration Report.
4
Confirm the name of the mobile device to connect to, and then tap [Yes].
Manual Connect on Android OS/iOS
Note
To connect mobile devices manually, [Group Owner] must be selected for [Group Settings] under [Device] >
[Connectivity & Network Setup] > [Wireless LAN Settings] > [Wi-Fi Direct Settings] in the System
Administration mode on the device.
1
Tap [Device] > [Information & Reports] on the Home screen.
2
Tap [Wireless LAN Status].
3
Check [SSID:] and [Passphrase:] under [Wi-Fi Direct Connection].
4
Open the Wi-Fi settings screen on your mobile device and turn on Wi-Fi.
5
From the list, tap the SSID for the device checked on Step 3.
6
Enter the passphrase for the device checked on Step 3.
Disconnecting the Wi-Fi Direct
When the number of concurrent connections may have reached the upper limit (up to 3
devices) and cannot connect to any other devices, follow the procedures below for
disconnection.
Disconnecting the Mobile Device from the Device Menu
1
Change [SSID Suffix] or [Passphrase] on the [Wi-Fi Direct Settings] menu under [Device] >
[Connectivity & Network Setup] > [Wireless LAN Settings].
The Wi-Fi Direct group is reconstructed with a new SSID and passphrase to disconnect the
mobile device.
Note
When you reconnect the disconnected mobile device to the device, select the new SSID and enter the
passphrase on the Wi-Fi settings screen on your mobile device.
] (menu) and select [Wi-Fi Direct].
WLAN Network Configuration
47
Advertisement
Table of Contents
