Parameter
Item No.
Paper tray
Coordinate
rotation
Color mode
Extended Settings
Parameter
Item No.
Auto layout
Active palette
No. of prints
2 sided printing
Alphanumeric
fonts
Position
adjustment
(Vertical
adjustment)
(Horizontal
adjustment)
Number of sets
103
[0] (Default): Auto
[1]: Tray1
[2]: Tray2
[3]: Tray3
[4]: Tray4
[5]: Tray5
Note
When [Auto] is selected and paper of the same size in the same orientation in
multiple trays is loaded, paper will be fed in the order of Tray 1 Tray 2 Tray 3
Tray 4. If paper of the same size is loaded in multiple trays but in different
orientations, feeding of the paper loaded in the landscape orientation is prioritized.
104
[0] (Default): 0 degrees
[1]: 90 degrees
105
[0]: Color
[1] (Default): Grayscale
[2]: Black pen
106
Selects whether to perform auto layout of the document or not.
[0] (Default): ON
[1]: OFF
107
Selects whether to use a pen specified by command or set on the panel.
[0] (Default): Command
[1]: Panel
108
[1] - [250] (Default: 1): 1 - 250
110
[0] (Default): None
[1]: Head to head
[2]: Head to toe
112
Sets the font for single-byte characters.
Reference
For more information on fonts, refer to "Available Fonts" (P.480).
[0] (Default): Stroke
[1]: Roman
[2]: Sans serif
113
Adjusts the hard clip area vertically or horizontally. You can set from -250
mm to +250 mm in 1 mm increments.
position
[0] (Default): Does not move the hard clip area.
[1] - [250]: -250 to -1 mm
[251] - [500]: +1 to +250 mm
114
Important
position
Data outside the printable area is not printed regardless of the adjustment of the
print position. In addition, data moved outside the printable area as a result of
adjusting the print position is not printed.
115
Sets the method for specifying the print sets.
[0] (Default): Protocol
[1]: Panel
[2]: Command
Value
Value
Emulation
501