Fuji Xerox ApeosPort-VII C4421 User Manual page 349

4
Click [System] on the left menu.
5
Click [Security] > [Certificate Settings].
6
Click [Create] > [Generate Self-Signed Certificate].
7
Configure other settings as required.
8
Click [Start].
9
Click [Close] after the certificate has been generated.
 To import the certificate issued by another CA
Before importing the certificate issued by another CA, create the self-signed certificate and
make the settings so that HTTP communication is encrypted.
Reference
 For details on how to configure the encryption settings for HTTP communication, refer to "Configuration of
HTTP Communications Encryption" (P.344).

The device supports to import RSA public key (up to 4096 bits) or ECC public key (P-256/P-384/P-521).
1
Start CentreWare Internet Services and log in to the System Administration mode.
Reference

For details, refer to "Starting CentreWare Internet Services" (P.85).
2
Click [Details] located next to the device image on the top part of Home screen.
3
Confirm that [Device's Email Address] is input.
Note
 [Device's Email Address] must be same as the email address that the certificate mentions.
4
Click [System] on the left menu.
5
Click [Security] > [Certificate Settings] > [Import].
6
Click [Select] and select the file to import on the displayed dialog box, then click [Save].
Note

You can also directly enter the path of the file to import.
7
Enter the password of the certificate to [Password].
8
Enter the same password as the previous step to [Retype Password].
9
Click [Start].
10
Click [Close] after the import has finished.
Configuration of Email Encryption/Digital Signature
349