[Software Options]; [Software Options - Usb]; [Software Update]; [Power On Self Test] - Fuji Xerox ApeosPort-VII C4421 User Manual

[Software Options]

This feature is for service representative use.

[Software Options - USB]

Installs the USB dongle to make the optional features available.

[Software Update]

When the EP system is used, this feature is used to upgrade the software for the EP system
when the version upgrade is required. The upgrade can be conducted immediately, or on
the specified date and time.
Important

After the downloading is finished, the device automatically restarts and upgrades the software. After the
device restarts again and the Home screen is displayed, the software upgrade is completed. Do not turn the
power off during upgrade. The device may not start due to incomplete installation.
Note

To use this feature, a dedicated contract is needed in addition to a use of the EP system service. For more
information, contact our Customer Support Center.
 The EP system may not be able to be used in some areas. For application, contact our Customer Support
Center.
Reference
 For information on the EP system, refer to "EP System" (P.512).

[Power on Self Test]

Set whether or not to perform self test when the device is turned on.
If any abnormal condition such as intentional program modification is found during the
program diagnosis, the device stops starting up and records the information in the audit
log.
Note

The information may not be recorded in the audit log depending on the status of program malfunction.

[Check Smart Card Details]

When you select [Check Smart Card Details] and touch your smart card to the IC Card
Reader (optional), the information of the smart card appears on the touch screen.
Note
 You can register the authentication information using CentreWare Internet Services. For more information,
refer to the help of CentreWare Internet Services.

[Delete All Certificates / Initialize Settings]

Deletes all certificates stored in the device and initializes the security settings associated
with certificates. This feature is designed to use when you cannot use a certificate data in
the device because of an abnormality of certificate file even when the certificate is set to
enabled for [SSL/TLS Settings] under [Connectivity & Network Setup] > [Security Settings].
[Maintenance]
243