Connecting The Power Cord - Fujitsu PRIMERGY CX400 M6 Upgrade And Maintenance Manual

Basic hardware procedures
4.11

Connecting the power cord

Connecting the power cord (AC PSU)
CAUTION
The AC PSU adjusts automatically to any mains voltage in the range
from 100 V - 127 V or 200 V - 240 V.
▶
You may only operate the server enclosure if its rated voltage range
corresponds to the local mains voltage.
Figure 59: Inserting the cable clamp
▶ Insert the cable clamp into the hole of the PSU as shown.
▶ Connect the power cords to the PSUs.
84 Upgrade and Maintenance Manual CX400 M6