Table of Contents
Advertisement
7
Installing the Washer Bottle
Parts needed for this procedure:
1
Washer bottle
1
Bracket
1
R-clamp
3
Carriage bolt (5/16 x 1 inch)
2
Bolt (5/16 x 3/4 inch)
5
Flange nut (5/16 inch)
1
Carriage bolt (1/4 x 3/4 inch)
1
Nut (1/4 inch)
Installing the Washer Bottle
Kubota Engine Only
1.
Use the 3 carriage bolts (5/16 x 1 inch), (5/16 x
1 inch), and 3 flange nuts to secure the bracket
to the frame
(Figure
Figure 30
1. Flange nut (5/16 inch)
2. Carriage bolt (5/16 x 1
inch)
2.
Torque the bolts to 1978 to 2542 N∙cm (175 to
225 in-lb).
3.
Use the 2 carriage bolts (5/16 x 3/4 inch) and
flange nuts to secure the washer bottle to the
bracket
(Figure
31).
30).
3. Bolt (5/16 x 3/4 inch)
4. Flange nut (5/16 inch)
1. Bracket
2. Carriage bolt (5/16 x 3/4
inch)
4.
Torque the bolts to 1978 to 2542 N∙cm (175 to
225 in-lb).
5.
Connect the washer tube to the washer bottle
and secure it to the frame with cable ties
32).
g032446
1. Washer tube
19
Figure 31
3. Flange nut (5/16 inch)
4. Washer bottle
Figure 32
g032447
(Figure
g032449
Advertisement
Table of Contents
