Table of Contents
Advertisement
Figure 120
1. Locknut
3.
Align the bolt holes to loosely install the bolts
and spacers on the right side of the machine
(Figure
122).
Figure 121
1. Bolt (3/4 x 4 inches)
4.
Torque the bolts to 359 N∙m (265 ft-lb) to secure
the summer frame to the machine frame.
g032855
2. Bolt (3/4 x 4 inches)
g032856
2. Locknut
Connecting the Hydraulics to the
Summer Frame
1.
Place a suitable drain pan underneath the valve
and disconnect the hydraulic hoses from the
control valve.
2.
Loosen the supply-hose fitting that is connected
to the gear pump and rotate the supply hose
toward the right side of the machine
122).
1. Gear pump
3.
Use the retaining ring, pivot pin, and bolt to
secure the deck-lift cylinder to the pivot post
(Figure
123).
1. Retaining ring
2. Lift cylinder
4.
Install the hydraulic-return hose to the port
marked T on the control valve
50
(Figure
Figure 122
2. Supply-hose fitting
Figure 123
3. Bolt
4. Pivot pin
(Figure
124).
g032777
g032735
Advertisement
Table of Contents
