Toro Polar Trac Cab 30474 Operator's Manual page 12

Connecting to the Radiator Hose
Yanmar Engine Only
1. Locate the radiator hose
Figure 10
1. Cut lines
2. Use a cutting tool to cut the radiator hose at the
cut lines (Figure
3. Slide the cut ends over the tee fitting and secure
it using the hose clamp (3/4 to 1-1/2 inches) as
shown in Figure
1. Hose clamp (3/4 to 1-1/2
inches)
(Figure 10).
10).
11.
Figure 11
2. Tee fitting
Connecting to the Radiator Hose
Kubota Engine Only
1. Locate and remove the radiator hose
12).
1. Cut lines
g032396
2. Use a cutting tool to cut the radiator hose at the
cut lines (Figure
3. Slide the cut ends over the tee fitting and secure
it using the hose clamp (3/4 to 1-1/2 inches) as
shown in
g032398
1. Tee fitting
12
Figure 12
12).
Figure 13.
Figure 13
2. Hose clamp (3/4 to 1-1/2
inches)
(Figure
g032421
g032420