Toro Polar Trac Cab 30474 Operator's Manual page 22

Figure 37
1. Relay
2. Relay connector
3. Fuse (60 A)
4. Fuse holder
2. Install the relay to the relay connector
37).
3. Install the fuse (60 A) to the fuse holder
37).
4. Install the fuse (10 A) to the fuse assembly and
secure it with the fuse-assembly cap
g032518
5. Fuse assembly
6. Fuse (10 A)
7. Fuse-assembly cap
(Figure
(Figure
(Figure 37).
Routing the Wire Harness
Kubota Engine Only
1. Route the 3 cab connectors through the
grommet (Figure
1. Cab connectors
2. Relay assembly
3. Fuse assembly (60 A)
4. Washer-bottle connector
2. Route the auxiliary-power wire across the frame
support, down along the ROPS tube, and toward
the operator controls
3. Use the cable ties to secure the wire harness
to the frame.
Note:
Do not secure the wire harness to hot or
moving parts.
22
38).
Figure 38
5. Positive connector (red)
6. Negative connector (black)
7. Auxiliary-power wire
(Figure 38).
g032517