Toro Polar Trac Cab 30474 Operator's Manual page 24

For groundmaster 7200 series mower
Table of Contents

Advertisement

3.
At the fuse block
following wire pairs:
Component
Wire color
Kit wire
Green
harness—auxiliary
power wire
Fuse
Pink
block—machine
wire harness
(options relay)
Note:
If the auxiliary-power wire is used in another
circuit, install an additional wire harness fuse
block and key start harness; refer to steps
through 3.
4.
Install the fuse (10 A) into the fuse-block slot
(Figure
41).
5.
Use the cable ties to secure the wire.
Note:
Do not secure the wire harness to hot or
moving parts.
Connecting the Auxiliary-Power
Wire—Additional Wire Harness
Fuse Block
Note:
Use this procedure if you do not have an open
slot in the fuse block for the machine.
1.
Assemble the additional wire harness fuse block
(Part No. 92-2641) onto the fuse block of the
machine
(Figure
(Figure
41), connect the
Connector type
Insulated blade
connector
Insulated socket
connector
42).
1
1. Wire harness fuse block
(Part No. 92-2641)
2. Fuse (10 A)
3. Fuse block of the machine
4. Green wire—18 gauge
(Polar Trac kit harness)
2.
Connect the wire harness fuse block (Part No.
92–2641) to the fuse block
machine as follows:
Component
Wire harness fuse
block (Part No.
92-2641)
Fuse
block—machine
wire harness
3.
Connect the key start harness (Part No.
107-0672) to the harness fuse block (Part No.
92–2641) wire
Component
Key start harness
(Part No.
107-0672)
Wire harness fuse
block (Part No.
92-2641)
4.
Connect the key start harness (Part No.
107-0672) to the auxiliary-power wire of the
Polar Trac kit harness
24
Figure 42
5. Blue wire—18 gauge (key
start harness—Part No.
107-0672)
6. Red wire—12 gauge (wire
harness fuse block—Part
No. 92-2641)
7. Red wire—10 gauge (wire
harness fuse block—Part
No. 92-2641)
8. Pink wire (fuse block of
the machine)
(Figure
Wire color
Connector type
Blade connector
Red (10 gauge)
Red (10
Socket connector
gauge—optional
fuse block)
(Figure
42) as follows:
Wire color
Connector type
Blue (18 gauge)
Uninsulated socket
connector
Red (12 gauge)
Insulated blade
connector
(Figure
42) as follows:
g234232
42) of the

Advertisement

Table of Contents
loading

This manual is also suitable for:

Polar trac cab 30675

Table of Contents