Figure 58
1. Bolt
8.
Roll the summer frame forward and store it for
seasonal changeover
Figure 59
1. Summer frame
Note:
Retain or loosely install the hardware that you
removed during this procedure so that it is available
for seasonal changeover.
g032737
2. Locknut
(Figure
59).
g032570
12
Installing the Cab
Parts needed for this procedure:
1
Cab
2
Bulb seal
1
Rear foam seal
1
Right, rear- foam seal
1
Left, rear foam seal
1
Right, middle foam seal
1
Left, middle foam seal
1
Right, tank foam seal
2
Side, front foam seal
1
Front foam seal
1
Left, side foam seal
1
Right, side foam seal
4
Rubber isolator
4
Bolt (1/2 x 3-1/4 inches)
4
Washer (1/2 inch)
4
Large washer
4
Nut (1/2 inch)
2
Bolt (3/4 x 3-1/2 inches)
2
Locknut (3/4 inch)
Applying the Safety Decal
Follow this procedure only if required by your local
road regulations.
Apply the safety decal to the rear window as shown
in
Figure
60.
30