Toro Polar Trac Cab 30474 Operator's Manual page 51

Figure 124
1. Hydraulic-return hose
5. Install the hydraulic-supply hose to the port
marked P2 on the control valve
6. Tighten all hose fittings to prevent them from
leaking.
Connecting the PTO
1. Use the roll pin connect the drive shaft to the
gearbox shaft (Figure
Figure 125
1. Gearbox shaft
2. Bolt
3. PTO yolk
2. Torque the bolts on the PTO yolk to 20 to 25
N∙m (15 to 18 ft-lb).
g032445
2. Hydraulic-supply hose
(Figure 124).
125).
g032627
4. Locknut
5. Roll pin
Installing the Deck and Cover
Plates
1. Use the pivot pin and hairpin to secure the
operator deck as shown in
1. Hairpin
2. Operator deck
2. Use the washer and hairpin to secure the lift arm
to the operator plate
1. Washer
2. Pivot pin
3. Use the bolts (1/4 x 5/8 inch) to secure the cover
plates to the machine
51
Figure 126.
Figure 126
3. Pivot pin
(Figure 127).
Figure 127
3. Lift arm
4. Hairpin
(Figure 128).
g032773
g032774