Toro Polar Trac Cab 30474 Operator's Manual page 52

Figure 128
1. Bolts (1/4 x 5/8 inch)
Removing the Conversion Rollers
1. Remove the conversion rollers that are on each
side of the summer frame
Figure 129
1. Conversion roller
2. Set them aside for the next seasonal conversion.
g032736
2. Cover plates
(Figure 129).
g032776
Installing the Roll Bar
Note:
Have an another person help you install the
roll bar.
1. Align the holes in the roll bar with the holes in
the lower-ROPS tube
1. Pivot bolt
2. Lanyard washer
3. Roll bar
2. Assemble the pivot bolt and lanyard washer to
the upper holes in the roll bar and lower-ROPS
tube and tighten the bolt by hand
3. Repeat step 2
4. Install the pivot-lock pins through the lower holes
in the roll bar and lower-ROPS tube, and secure
the lock pins with the hairpins
Completing the Summer Frame
Installation
Connect the battery; refer to
(page 25).
52
(Figure 130).
Figure 130
4. Pivot-lock pin
5. Lower-ROPS tube
6. Hairpin
(Figure
at the other side of the machine.
(Figure
Connecting the Battery
g032775
130).
130).