Cab Maintenance; Filling The Washer-Fluid Bottle; Cleaning The Cab Air Filters - Toro 31200 Operator's Manual

Cab Maintenance

Filling the Washer-Fluid
Bottle
1. Perform the pre-maintenance procedure; refer
to Preparing the Machine for Maintenance (page
45).
2. Open the hood and locate the washer-fluid bottle
(Figure 78).
Figure 78
Washer-Fluid Bottle with Washer-Fluid Symbol
3. Fill the bottle with washer fluid as needed.
4. Close the hood.

Cleaning the Cab Air Filters

Service Interval: Every 250 hours Replace the cab air
filters if they are torn or excessively
dirty.
1. Remove the screws and grates from over both
the in-cab and rear cab air filters
Figure 80).
1. Filter
2. Grate
g028438
(Figure 79 and
1. Filter
2. Grate
2. Clean the filters by blowing clean, oil-free,
3. Install the filters and grate, securing them with
62
1
Figure 79
1
2
3
Figure 80
compressed air through them.
Important:
If either filter has a hole, tear, or
other damage, replace it.
the thumbscrews.
2
3
g028378
g028378
3. Screw
2
g028379
g028379
3. Screw