Toro Polar Trac Cab 30474 Operator's Manual page 20

Note:
Do not secure the hoses to hot or moving
parts.
Installing the Washer Bottle
Yanmar Engine Only
1. Use the 3 carriage bolts (5/16 x 2 inch), (5/16 x
1 inch), and 3 flange nuts to secure the bracket
to the frame (Figure
Figure 33
1. Bolt (5/16 x 2 inch)
2. Flange nut (5/16 inch)
2. Torque the bolts to 1978 to 2542 N∙cm (175 to
225 in-lb).
3. Use the 2 carriage bolts (5/16 x 3/4 inch) and
flange nuts to secure the washer bottle to the
bracket (Figure 34).
33).
3. Bolts (5/16 x 1 inch)
4. Flange nut (5/16 inch)
1. Carriage bolt (5/16 x 3/4
inch)
4. Torque the bolts to 1978 to 2542 N∙cm (175 to
225 in-lb).
5. Connect the washer tube to the washer bottle
and secure it to the frame with cable ties
35).
g032448
1. Washer tube
Note:
Do not secure the hoses to hot or moving
parts.
20
Figure 34
2. Flange nut (5/16 inch)
Figure 35
g032450
(Figure
g032515