Drive Belt Replacement
About
This procedure provides instruction to remove and install the Drive Belt
Procedure
Review entire procedure before starting.
Removal Instructions
1. Switch the power OFF and
2. Remove the hood cover, see
3. Remove the left and right trim landing covers, see
on
page 59.
4. Relax the running belt tension by loosening the left and right 5/16" hex key tension
adjustment bolts. Alternately loosen the left and right adjustment bolts in 1/4 turn
1
Disconnect a device power cord plug or cable connector from the power receptacle or outlet.
Experience Series 700 Line Treadmills
1
unplug
the power cord.
"Covers and Panels Replacement" on
5 Replacement Procedures
Drive Belt Replacement
page 54.
"Trim Landing Covers Replacement"
94