Table of Contents
Advertisement
DMZ
On this page, you can configure DMZ settings for your gateway. For security reasons, it is recommended that you create a static IP
address for the host server that you enter on this page.
1. In the left menu, click
2. To enable this feature, click the
3. In the
Host IPv4 Address
Note: It is recommended to create a static DHCP association to this host address.
4. Click the
Apply
button in the
Port Forwarding
On this page, you can configure a local network device to have unrestricted access to the Internet. This is useful when local network
devices cannot run an Internet application properly behind the firewall. This is also known as exposed host or virtual server.
1. In the left menu, click
2. To add a mapping, click the
Forwarding
dialog box appears.
SmartRG Inc., an Adtran company. Proprietary and Confidential. All Rights Reserved. © 2020
Network
>
Firewall
> DMZ. The following page appears. The WAN IP Address is read-only.
slide button
to the right of Enabled.
field, select or enter the IP address for which unrestricted Internet access is to be allowed.
Pending changes...
dialog box to save your settings.
Network
>
Firewall
>
Port
Forwarding. The following page appears.
+ Add Rule
button to the right of the
Port Forwarding
section heading. The
Add/Edit Port
59
Advertisement
Table of Contents
