Network Interface Modules; Figure 5. Netvanta Shdsl, Annex A Nim2 - ADTRAN 6310 Installation Manual

Option Modules

Network Interface Modules

NetVanta SHDSL, Annex A NIM2 (P/N 1700101G1)
The NetVanta SHDSL, Annex A NIM2 (shown in
the NetVanta 6310/NetVanta 6330 Series. See
Operating Mode
• Line termination (CO)
• Network termination (CPE)
SHDSL Interface
• Supported Standards: ITU-T G.991.2
Annex A and Annex F
• 2-wire Line Rate: 192 to 5696 kbps in
64 kbps increments
• 4-wire Line Rate: 384 to 11,392 kbps in
128 kbps increments
• Payload: ATM (AAL5)
• Linecode: TC-PAM
• Connector: RJ-45
Clock Source
• CPE Operating Mode: Network
• CO Operating Mode: Internal
24
NetVanta 6310/6330 Series Hardware Installation Guide
Figure
Table A-8 on page 45
SHDSL
ANNEX A

Figure 5. NetVanta SHDSL, Annex A NIM2

Features and Specifications
Copyright © 2013 ADTRAN, Inc.
5) provides a SHDSL 2-wire or 4-wire interface for
for the SHDSL EFM connector pinouts.
Compliance
• EMC - see Electromagnetic
Compatibility (EMC) Table on page
• UL/CUL 60950-1
• ACTA/FCC Part 68
• IC CS-03
• RoHS compliant (Telecommunications
exemption)
Environmental
• Operating Temperature: 0°C to 50°C
• Storage Temperature: -20°C to 70°C
• Relative Humidity: Up to 95 percent,
noncondensing
Physical
• Dimensions: 4.25-inch W x 4.25-inch D
6.
61700100G1-34F