Table of Contents
Advertisement
Field Name
Description
method for generating the WPS PIN. Options are: Enter STA PIN and Use AP PIN. If you select
Enter STA PIN, type the PIN in the field below the radio button. If you select Use AP PIN, the
entry field and the
To add an enrollee station, click
Note: If the
mode is automatically made active.
(Available only when Enter STA PIN is selected ) Enter the MAC address of the authorized
Set Authorized
Station MAC
(input) station.
Set WPS AP Mode Select how security is assigned to clients.
Device PIN
This value is generated by the access point.
3. In the
Manual Setup AP
4. Select the
Network Authentication
WPA-PSK. Detailed instructions are provided for each method in the following sections:
"Open and Shared Network Authentication"
l
"802.1X Network Authentication"
l
"WPA2-PSK and Mixed WPA2/WPA-PSK Network Authentication"
l
"WPA2 and Mixed WPA2/WPA Network Authentication"
l
5. Click
Apply/Save
to commit your changes.
Open and Shared Network Authentication
The same configuration fields apply for both Shared and Open authentication types except that
default for the Shared method.
The following fields appear when you select Open or Shared in the
SmartRG Inc., an ADTRAN company. All Rights Reserved. © 2020
Set Authorized Station MAC
Add
PIN
and
Set Authorized Station MAC
Configured: The gateway assigns security settings to clients. This is the default.
l
Unconfigured: An external client assigns security settings to the gateway.
l
section, select the SSID for the device that you want to configure.
method and then fill in the fields that appear. The default method is Mixed WPA2 /
field disappear.
Enrollee.
fields are left blank, the PBC (push-button)
Network Authentication
field.
WEP Encryption
is enabled by
113
Advertisement
Table of Contents
