Digital Copy In Two-Channel Mode - Sony PCM-3348HR Quick Reference

16. Digital Copy Function

16-3. Digital Copy in Two-Channel Mode

Selecting the source and destination channels
1
Check that the DIGITAL COPY button is lit.
2
Press the REPRO button of the source channel and the REC READY button of
the destination channel.
To carry out a copy of only a single channel, skip to step 4.
3
Press the REPRO button of the second source channel and the REC READY
button of the second destination channel.
4
Press the CH SET button.
Changing or deleting channels after completing the settings
1
Press the CH SET button.
2
•
Changing the channels
Press the REPRO button for the new source channel or REC READY button
for the new destination channel.
•
Deleting channels
Press the REPRO button for the source channel for which the display is
flashing, then press the REC READY button for the corresponding destination
channel for which the display is flashing.
3
After making the change or deletion, press the CH SET button.
Deleting all the channel pairs
Press the DIGITAL COPY button, turning it off.
Carrying out a digital copy
With the DIGITAL COPY button still lit, carry out a normal insert recording or auto
punch-in/out operation.
When the digital copy ends, press the DIGITAL COPY button, turning it off.
36
Digital Copy Function