Sony PCM-3348HR Quick Reference page 85

Error code
E.08-06 SHIFTER/SHUTTLE error
E.08-07 Tension error. The tension value is extraordinarily high or low.
E.08-08 Tape speed error. The tape speed is extraordinarily fast.
E.08-09 Reel diameter fault. The detected reel diameter is not normal.
E.08-10 Drive voltage fault.
E.08-11 Communications error with capstan.
E.08-12 Communications error with MC board.
E.08-13 Loading error
E.08-14 Unload complete timeout error
E.08-15 Servo parameter error
E.09-02 DET STATUS error
E.09-03 REC STATUS error
E.09-04 DET-to-MC communications error
E.09-05 AD GAIN (SYNC HEAD) error (including coefficient error in EEPROM)
E.09-06 C1 (SYNC HEAD) error (including coefficient error in EEPROM)
E.09-07 C3 (SYNC HEAD) error (including coefficient error in EEPROM)
E.09-08 AD GAIN (MONITOR PB HEAD) error (including coefficient error in EEPROM)
E.09-09 C1 (MONITOR PB HEAD) error (including coefficient error in EEPROM)
E.09-10 C3 (MONITOR PB HEAD) error (including coefficient error in EEPROM)
E.09-11 REC coefficient error (including coefficient error in EEPROM)
E.09-12 ERASE coefficient error (including coefficient error in EEPROM)
E.09-15 DET error. ALARM ATN is received from DET CPU.
E.09-16 NACK return from DET in MC-to-DET communication.
E.10-02 REMOTE2 interface self-diagnosis error
E.10-03 REMOTE2-to-MC communication error
E.11-02 Communications RAM write/read check error in REMOTE3 interface self-
diagnosis
E.11-03 CRC generation circuit error in REMOTE3 interface self-diagnosis
E.12-02 REMOTE1 interface self-diagnosis error
E.13-02 REMOTE4 interface self-diagnosis error
E.14-02 DIO (MULTI) loop error in self-diagnosis
E.14-03 DIO (MULTI) emphasis flag error in self-diagnosis
E.14-04 2-CH DIO emphasis flag error in self-diagnosis
E.14-05 SDIF-2 2CH-DIO loop error in self-diagnosis
E.14-06 AES/EBU 2CH-DIO loop error in self-diagnosis
Meaning
81
Warning Lamps