Editing; Connections - Sony PCM-3348HR Quick Reference

21. Editing

References:
•
RM-3324 Operation Manual, "7-2 Electronic Editing"
•
PCM-3348HR Operation Manual, Chapter 9 "Editing"
Note
For the PCM-3324S, this function requires an RM-3324 remote control unit, a
DABK-3325 digital I/O interface board, and for both PCM-3324S/3348HR an
SDIF-2 (balanced) format special-purpose cable.

21-1. Connections

Connect a monitor signal to one of the recorder analog audio channels for use as a
cue signal during editing. The tape on the player should also have a cue signal
already recorded. Monitor the player sound through the recorder.
Analog audio signal
Master unit
A1/A2
OUTPUT
PCM-3324S/
PCM-3348HR
(recorder unit)
REMOTE-3
TAPE
RECORDER
RM-3324/
RM-3348HR
54
Editing
Mixing console
INPUT
OUTPUT
A1/A2
INPUT
SDIF-2
(BALANCE)
INPUT
Digital audio signal
Word sync signal
WORD SYNC
OUT
SECTOR
SYNC
Sector sync signal
OUT
SECTOR
ADDRESS
Sector address signal
OUT
IEEE Std.
IEEE-488 bus signal
488-1978
Connections for electronic editing
Analog audio
signal
SDIF-2
(BALANCE)
OUTPUT
WORD SYNC
IN
SECTOR
SYNC
IN
SECTOR
ADDRESS
IN
IEEE Std.
488-1978
Slave unit
PCM-3324S/
PCM-3348HR
(player unit)
REMOTE-3
TAPE
RECORDER
RM-3324/
RM-3348HR