Ending a chase recording (or rehearsal) without abandoning the chase
operation
Press the PLAY button.
This switches to the chase playback mode.
Temporarily halting the chase operation
Stop the tape transport on the master unit, or stop the input of the external time code.
When the tape transport on the master unit stops, the tape transport on the slave unit
also stops. The LOCATE TIME display shows the indication "no in tc."
Ending the chase operation
Press the STOP button or TC CHASE button on the slave unit.
The tape transport stops, the TC CHASE button goes off, and the STOP button
lights. The units indicated on the LOCATE TIME display switch to frames.
Error indications during chase operations
Indication
no in tc
The external time code is not input.
no Pb tc
There is no time code on the tape on the
slave unit.
Problem
Action to be taken
Input the external time code.
Prestripe the tape being used,
or use another tape which has
already been prestriped.
Time Code Chase
49