Table of Contents
Advertisement
OPERATION MODES
This mode creates spacious reverberation as experienced in a
large concert hail or an open-air stage setting.
Anewly developed algorithm for stereo processing provides a
wide-spread sound stage.
Besides total reverberation, this mode is also suited for
instrument effects such as guitar and keyboard play or for use
with vocals during recording.
Basic parameters
0.3—99.0sec
1—733msec (CH1, 2)
1—733msec (CH1, 2)
0.000—+0.992 (CH1, 2)
+designates the phase (set with PHASE)
The numbers 1, 2 in the chart denote channel 1 and 2.
One-point advice
To simulate a large concert hall, set REV. T. to a somewhat
lower value and achieve the designed effect with PRE. DT.
E. RFL. L. should also be kept low. The following values may
serve as a guideline.
1.5—3.8sec
50—120msec
30—80msec
0.101—0.992
RT HIGH
0.40—0.50 (Do not make the setting too live.)
SPREAD
8—13 (Spacious impression is critical.)
PRE. DT, E. RFL. T., and E. RFL. L. can be set for each channel
separately, but for a normal hall, identical values should be
chosen. When using the effect for piano, selecting different E.
RFL. T. and E. RFL. L. setting for channel 1 and channel 2
should give best results.
Level
PRE. DT1. 2
Advertisement
Table of Contents
