2
Mount a blank tape on the recorder unit, and set the switches and buttons as
follows:
•
MASTER SAFE switch: OFF
•
REC MODE switch: ADVANCE
•
TIMER MODE button: CTL ABSOLUTE
•
SAMPLING FREQ (or Fs) switch: Sampling frequency of the original tape
•
WORD LENGTH switch (PCM-3348HR only): Word length of the original
tape
•
INPUT SELECT switch: DIGITAL
•
SYNC CLOCK switch: EXT
•
TIME CODE selection switch: EXT
•
ALL CHANNEL REC READY button: ON
•
A1 A2 REC READY button: ON
•
TIME CODE REC READY button: ON
Check that the 2CH DIO SET UP button on the remote control unit for the
recorder unit is off.
3
On the recorder unit, set the CTL to the start point address on the original tape.
If the original tape does not start from 00
value, using the numeric buttons and ↑ button on the remote control unit.
4
Begin playback on the player unit.
5
On the recorder unit, holding down the REC button, press the PLAY button.
00
00
set the address to the CTL
H
MIN
SEC
Backup Copy Function
21