15. Time Shift Editing Using the Sound
Memory Function
References:
•
RM-3324 Operation Manual Chapter 4, "Time Shift Editing Using the Sound
Memory Function"
•
PCM-3348HR Operation Manual Chapter 5, "Time Shift Editing Using the Sound
Memory Function"
Note
Using the sound memory function on the PCM-3324S requires an RM-3324 remote
control unit, and also requires the PCM-3324S to be fitted with a DABK-3329 sound
memory board.
15-1. Selecting the Sound Memory Mode
1
Set the REC MODE switch on the recorder to INSERT.
2
Press the STOP button to stop tape transport.
3
Press and light the SOUND MEMORY button on the remote control unit.
15-2. Selecting the Source and Destination Channels
1
Check that the SOUND MEMORY button is lit, then press the MEM STOP
button to select the memory stop mode.
2
Press the INPUT button or REPRO button for the first source channel, so that it
starts flashing.
If copying a mono signal, skip to step 4.
3
Press the INPUT button or REPRO button for the second source channel, so that
it starts flashing.
4
Press the CH SET button.
5
Press the REC READY button for the first destination channel, so that it starts
flashing.
If copying a mono signal, skip to step 7.
Time Shift Editing Using the Sound Memory Function
(Continued)
25