Time Shift Editing - Sony PCM-3348HR Quick Reference

15. Time Shift Editing Using the Sound Memory Function

15-8. Time Shift Editing

Saving the punch-in point and punch-out point
1
Listening to the tape playback sound, press the CUE STORE button at the point
to begin copying to the destination channel.
2
Press and light the RECALL button, then using the numeric buttons, enter the
number of the cue point register used in step 1.
3
Press the STORE and IN buttons in that order.
4
Press the RECALL, IN, +, RECALL, SOUND MEMORY, =, STORE, and
OUT buttons, in that order.
5
Press the RECALL, IN, STORE and MEM PLAY buttons, in that order.
Carrying out rehearsal and time shift editing
1
Press the MODE button repeatedly until the channel display shows "Au."
2
Press the MEM PLAY button.
3
Press the REPRO button for the destination channel.
4
Press the AUTO PUNCH button.
This carries out a rehearsal between the punch-in point and punch-out point.
Adjust the cross fade time or editing points as necessary.
5
Holding down the REC button, press the AUTO PUNCH button.
Between the punch-in point and punch-out point, this records the playback
signal from sound memory on the destination channel.
32
Time Shift Editing Using the Sound Memory Function