Digital Copy In Multi-Channel Mode - Sony PCM-3348HR Quick Reference

16-4. Digital Copy in Multi-Channel Mode

Selecting the source and destination channels
1
Check that the DIGITAL COPY button is lit, and that the points in the
destination channel display are lit.
2
Press the REPRO button of the first source channel and the REC READY
button of the first destination channel.
To carry out a copy of only a single channel, skip to step 5.
3
Press the REPRO button of the second source channel and the REC READY
button of the third destination channel.
4
Press the REPRO button of the third source channel and the REC READY
button of the third destination channel.
To set fourth and subsequent channel pairs, repeat this step as necessary.
5
Press the CH SET button.
Changing the selected channels
1
Press the CH SET button.
2
•
Changing a source channel
Press the REC READY button for the destination channel paired with the
source channel you wish to change.
•
Changing a destination channel
Press the REPRO button for the source channel paired with the destination
channel you wish to change.
3
•
Changing a source channel
Press the REPRO button for the new source channel.
•
Changing a destination channel
Press the REC READY button for the new destination channel.
4
Press the CH SET button.
Digital Copy Function
37