Channel-To-Channel Register Copy - 74 - Sony BZDM-7020 User Manual

Channel-to-Channel Register Copy – 74
Displaying the CHANNEL COPY menu
Making a channel-to-channel register copy
It is possible to copy a contiguous block of registers from one
channel to another.
In the EFFECT UTILITY menu, press F4 (CHANNEL COPY), to
display the CHANNEL COPY menu.
FROM TO
CHANNEL COPY menu soft key indications
Use the following procedure.
1
Press F1 (FROM).
The legend "FROM CHn" (where n is the current reference
channel number) appears in the prompt area on the screen
(above the numeric keypad area). (For example: "FROM
CH1")
2
Using the buttons in the channel selection section, specify the
copy source channel.
If you specify a channel number which is different from the
channel number displayed in step 1, the indication in the
prompt area changes to reflect the channel number which you
have just specified.
3
Enter the number of the first register in the source block of
contiguous registers from the numeric keypad, and press the
ENTER button.
The indication in the prompt area reflects the register number
you have just entered. (For example: "FROM CH1 12–")
EXEC
(Continued)
Chapter 8 Effect Utilities
CANCEL
8-11