•
TIME CODE selection switch: EXT or REGENE (EXT)
•
WORD LENGTH switch (PCM-3348HR only): Word length of the original
tape
3
On the recorder unit, set the CTL to the start point address on the original tape,
and record for approximately 30 seconds in advance recording mode.
4
Set the REC MODE switch on the recorder unit to ASSEMBLE.
5
Locate the tapes both on the recorder and player units at the CTL address start
point.
6
On the remote control unit connected to the player unit, press the SLAVE,
CLEAR, STORE, SYNC OFFSET buttons in that order.
7
Set the controls on the recorder unit as follows.
•
ALL CHANNEL REC READY button: ON
•
A1 A2 REC READY button: ON
•
TIME CODE REC READY button: ON
8
On the recorder unit (master unit) press the PLAY button.
9
Check that the player unit (slave unit) has synchronized, and on the recorder
unit, press the PLAY button and REC button simultaneously.
Backup Copy Function
23