Sony PCM-3348HR Quick Reference page 37

Adjusting the editing points
Adjusting the punch-in point
1
Press and light the REPRO button for the destination channel.
2
Press the AUTO PUNCH button.
The rehearsal begins.
3
As the tape playback sound from the destination channel id fading out, hold
down the IN button, and press the TRIM +/– buttons to adjust the punch-in
point.
4
Press the RECALL, IN, STORE and MEM PLAY buttons, in that order.
This saves the adjusted punch-in point as the sound memory playback start point
(PS register).
Adjusting the punch-out point
1
Press the MEM PLAY button.
2
Press and light the REPRO button for the destination channel.
3
Press and light the REPRO MUTE button.
4
Press the AUTO PUNCH button.
This carries out a sound memory playback rehearsal between the punch-in point
and punch-out point on the destination channel.
5
As the tape playback sound from the sound memory is fading out, hold down
the OUT button, and press the TRIM +/– buttons to adjust the punch-out point.
6
After adjusting the punch-out point, press the REPRO MUTE button to turn it
off.
Time Shift Editing Using the Sound Memory Function
33