Editing The Sound Memory - Sony PCM-3348HR Quick Reference

15-7. Editing the Sound Memory

1
Check that the source and destination channels are displayed.
2
Press the SF.mS/F.S button to select the units for adjusting the editing points.
•
Time code display mode: Frames
•
CTL display mode: Milliseconds or seconds
3
When you know the approximate address for the SA or EA value
1) Use the numeric buttons to display the relative address within the sound
memory of the sound memory editing start point (SA) or end point (EA) on
the LOCATE TIME display, then press the STORE button.
2) Press the START EDIT button or END EDIT button.
When you do not know the approximate address for the SA or EA value
Play back from the sound memory, and press the START EDIT button or END
EDIT button at the required point.
4
Press the INVERT button to toggle between playback before or after the editing
point, as indicated by the BEFORE and AFTER lamps.
5
While listening to the repeat playback, adjust the editing point by pressing the
START EDIT or END EDIT button as the case may be simultaneously with the
TRIM +/– buttons.
6
When the adjustment is complete, press the MEM STOP button.
Time Shift Editing Using the Sound Memory Function
31