Selecting The Sampling Frequency - Sony PCM-3348HR Quick Reference

2. Selecting the Sampling Frequency

References:
•
PCM-3324S Operation Manual, "2-4-2 Selecting the Sampling Frequency"
•
PCM-3348HR Operation Manual, "2-4-3 Selecting the Sampling Frequency"
Sampling frequency for prestriping or advance recording
Use the SAMPLING FREQ selection switch (PCM-3324S) or Fs selection switch
(PCM-3348HR) on the system control block and the FS SHIFT switch on the CTK
board to select the sampling frequency.
SAMPLING
FS SHIFT
FREQ (Fs)
switch
selection
switch

44.056 kHz
44.1 kHz OFF
ON
48.0 kHz OFF
ON
Note
If using a tape recorded on a system combining a VSU-3310 Vari-Sync Unit (with
the Fs SELECT key set to 44.056 kHz) and a PCM-3324, for recording or playback
on the PCM-3324S/3348HR recorder, use the FS SHIFT switch to select a sampling
frequency of 44.056 kHz. This is the only system for which use of the FS SHIFT
switch is recommended.
Sampling frequency other than for prestriping or advance recording
The unit automatically selects the sampling frequency to match that recorded on the
CTL track on the tape.
2
Selecting the Sampling Frequency
Lamp
Operating sampling frequency
display
Lit
Lit
Shifted down from
Flashing
the selected frequency by 0.1%
Lit
Shifted down from
Flashing
the selected frequency by 0.1%
44.056 kHz
44.1 kHz
48.0 kHz
Fs ID code
44.056 kHz
44.1 kHz
44.1 kHz
48.0 kHz
48.0 kHz