Safety Characteristics Acc. To En 62061; Safety Characteristics Acc. To En Iso 13849-1; Supply Voltage Ubus; Bus (Logic) - Bosch Rexroth IndraControl S20 Manual

DOK-CONTRL-S20*SSDO*8*-AP02-EN-P
IndraControl S20 Module With Safe Digital Outputs S20-SSDO-8/3
11.2.4

Safety characteristics acc. to EN 62061

11.2.5

Safety characteristics acc. to EN ISO 13849-1

11.2.6 Supply voltage U
Attainable SIL claim limit
Safe Failure Fraction (SFF)
Probability of dangerous failure
per hour for the complete mod‐
ule (PFH)
Hardware error tolerance (HFT)
of the module
Permitted service life
Tab. 11-5: Safety characteristics acc. to EN 62061
Attainable performance level
Diagnostic coverage (DC)
Mean time up to a dangerous
failure (MTTFd)
Tab. 11-6: Safety characteristics acc. to EN ISO 13849-1
(logic)
BUS
Logic voltage
Current consumption from U
Tab. 11-7: Supply voltage U
The bus coupler or infeed terminal of the station supply the mod‐
ule with the logic voltage U
For the technical data, refer to the data sheet of the bus coupler
or the infeed terminal.
Bosch Rexroth AG
Technical data and ordering data
SILCL = SIL 2 (single-channel)
SILCL = SIL 3 (dual-channel)
Depending on the parameterization and wiring, re‐
fer to chapter 3.6 "Connecting options for actua‐
tors depending on the parameterization" on page
14 and refer to chapter 7 "Connection examples
of the safe outputs" on page 33
99 %
SIL 2: Up to 1 % of 10
-6
SIL 3: Up to 1 % of 10
-7
Depending on the parameterization, refer to
"SIL/SIL CL" on page 35
1
20 years, at a low demand rate 25 years.
PL d (single-channel)
PL e (dual-channel)
Depending on the parameterization and wiring, re‐
fer to chapter 3.6 "Connecting options for actua‐
tors depending on the parameterization" on page
14 and refer to chapter 7 "Connection examples
of the safe outputs" on page 33
99 %
100 years
5 V DC
Typ. 260 mA (all outputs set, supplied by U
BUS
19.2 V DC to 30.2 V DC)
280 mA max.
(logic)
BUS
.
BUS
57/85
(corresponds to 1 * 10 )
-8
(corresponds to 1 * 10
-9
from
O