For Your Safety; General Information; General Safety Instructions - Bosch Rexroth IndraControl S20 Manual

DOK-CONTRL-S20*SSDO*8*-AP02-EN-P
IndraControl S20 Module With Safe Digital Outputs S20-SSDO-8/3
2

For your safety

2.1

General information

Target of the application descrip‐
Validity of the application descrip‐
Target group of the application de‐
scription
2.2

General safety instructions

Qualified staff
The present information informs on the functioning, operating and connecting
tion
elements and the parameterization of the safety module S20-SSDO-8/3. This
information allows to use the module S20-SSDO-8/3 in a CSos systems as
per the given requirements.
This application description applies to the moduleS20-SSDO-8/3 in the ver‐
tion
sion mentioned in the following as well as to the replacement by other device
types for the same or higher versions.
● Module type: S20-SSDO-8/3
● HW/FW version: 00/1.01
● Part number: R911173192
The product use described in this application description is only intended for
qualified electricians and staff trained by these qualified electricians that are
familiar with the current standards and other guidelines of the electrical engi‐
neering and especially with the relevant safety concepts.
Bosch Rexroth is not liable for unintended handling and damages at Bosch
Rexroth and third-party products by disregarding information given in this ap‐
plication description.
WARNING
Observe the safety instructions given in this chapter and the warnings in the
manual.
Qualified personnel in this manual are persons who by their training, experi‐
ence, instruction and their knowledge of the relevant standards, regulations,
accident prevention rules and working conditions have been authorized to
perform the appropriate activities required and thereby are able to recognize
and prevent potentially dangerous situations.
Additionally, knowledge on the following topics and products is required:
● Non-safety-related target system Sercos
● CIP Safety on Sercos (CSos)
● Components used
● IndraControl S20 product family
● Operation of software tools
● Safety regulations in the area of application
When using Csos systems, the following works have to be performed by
qualified staff:
● Planning
● Configuring, parameterizing, programming
● Installing, commissioning, maintaining
● Maintaining, decommissioning
Bosch Rexroth AG
Fatal injuries caused by unintended module
use.
7/85
For your safety