Table of Contents
Advertisement
1.3.3 Designations
The following designations are used in this documentation:
Table 4: Designations
Designation
Meaning
AD2000
Rules regarding the application and implementation of the Pressure
Equipment Directive
1.3.4 Abbreviations
The following abbreviations are used in this documentation:
Table 5: Abbreviations
Abbreviation
Meaning
EN
European Standard
DIN
Deutsche Industrienorm (German Industry Standard)
ISO
International Organization for Standardization
DBA
Pump safety block
EU
European Union
VDMA
German Machinery and Plant Manufacturing Association
2 Safety instructions
2.1 General information on this chapter
The product has been produced according to the rules AD 2000. However, there is
still the danger of personal injury and damage to property if you do not observe this
chapter and the safety instructions in this documentation.
▶
Read this documentation completely and thoroughly before working with the
product.
▶
Keep this documentation in a location where it is accessible to all users at
all times.
▶
Always include the required documentation when you pass the product on to
third parties.
2.2 Intended use
The valves comply with safety category B according to EN ISO 13849-1.
Store the safety valve in a dry and dust-free atmosphere which is free from etching
substances and fumes and which is subject to a low degree of humidity and only
minor temperature variations. For storage exceeding 12 months, we recommend
filling in clean preservation oil, see also DIN 7716.
The corrosion protection applied at the factory is sufficient if the valve is stored
under the stated conditions and if no condensate or leakage water may enter the
safety valve.
The safety valve may only be operated with the hydraulic fluids stated in
"Data sheet 25880".
Safety instructions
RE 25880-B/10.18, DBA...1X/...E, Bosch Rexroth AG
9/56
Advertisement
Table of Contents
