Accessing The User Interface; Configuring Software; Configuring The User Interface Port - 3Com Dual DSX-1 Getting Started Manual

3-2 C 3: N
HAPTER ETWORK
Accessing the
User Interface
Configuring
Software
Configuring the User
Interface Port
I C C
NTERFACE ARD ABLING
To access the UI of the corresponding NAC, connect the following cables
to the NIC's console port.
Callout Number
1
2
3
Configure the NIC for the necessary cable length (0–655 feet) through:
The NIC's UI port
3Com Total Control Manager/Simple Network Management Protocol
(SNMP) software
A generic Management Information Base (MIB) manager software
application
Connect to the UI port. Refer to the section Accessing the User Interface.
Access the UI console through a terminal emulation program.
Description
RJ-45 connector to NIC's console port
DB-25 male connector to modem for remote operations
DB-25 female-to-female null modem adapter to PC or
terminal COM port