Setting Gas Demand Values [Gas Demand Settings] - Panasonic CZ-256ESMC3 Operating Instructions Manual

Setting gas demand values
Set the gas demand values instructed to outdoor unit when the gas demand level is between 0 and 3 for
each of the groups set in "Outdoor unit settings" (P.177).
The settings in this screen can be used only when "GHP demand" has been selected in the demand
y
settings in the "Basic settings" screen (P.175).
1
Touch [System Settings] in "Settings".
The "System settings" screen is displayed.
z
1
2
Touch [Hybrid GHP/EHP settings].
Enter the identification number (password level 1 or 2) and
z
the "Hybrid GHP/EHP settings" screen is displayed.
3
Touch [Gas demand settings].
The "Gas demand settings" screen is displayed.
z
2
3
[Gas demand settings]
4
Put a check mark in the "Select" column.
Select the group you want to edit.
z
4
5
Touch [Set].
The operation dialogue is displayed.
z
184
5
Continued on next page