Panasonic CZ-256ESMC3 Operating Instructions Manual page 15

Buttons and boxes
There are varieties of buttons and boxes on the screen that you use to perform operations and settings on the touch panel.
Buttons
These are used to switch screens, save settings, switch settings on or off, select items, and similar operations.
Display example
Display example
Check boxes
These are mainly used to switch on or off item selection and functions.
Display example
Spin boxes
These are used to switch the display of items and to set numeric items such as time.
Display example
Status
Setting is off In this state the setting is off.
Setting is on In this state the setting is on.
Setting This indicates that the setting is currently unavailable due to other conditions.
unavailable
Status
Selected The highlighted item is the one that is currently selected.
Selection This indicates that the selection is currently unavailable due to other conditions.
disabled
Status
Unselected In this state the item is not selected.
Selected In this state the item is selected. (In this example, the automatic stop feature will operate.)
A check mark appears when you touch it. The check mark disappears when you touch it
again.
takes you to the next item.
Items may cycle around in the following way:
Gr.1 Gr.2
increases the numeric figure.
The numbers will change continuously if you continue to touch the button.
The numbers cycle around in the following way:
For example: When the number is an "hour"
"(blank)"
15
Operations on this unit
Explanation
Explanation
Explanation
Explanation
takes you to the previous item.
Gr.5
decreases the numeric figure.
"00" "01" "23"