Setting The Network - Panasonic CZ-256ESMC3 Operating Instructions Manual

Setting the network

To control remotely over a network, you first need to set up the network.
Consult your network administrator beforehand for the network settings.
1
Touch [System Settings] in "Settings".
The "System settings" screen is displayed.
z
1
2
Touch [Network settings].
Enter the identification number (password level 2) and the
z
"Network settings" screen is displayed.
3
Change the settings.
2
Item
DHCP On If you want to use a DHCP server, put a check
mark here.
If you enable this, you will be unable to set "IP
address", "Net mask", or "Default gateway".
IP address Set the IP address of this unit.
Touch the text box and enter with the
touchscreen keyboard.
y You cannot set "0.0.0.0" or
Net mask Set the net mask of this unit.
Touch the text box and enter with the
touchscreen keyboard.
y You cannot set "0.0.0.0".
Default gateway Set the default gateway of this unit if necessary.
Touch the text box and enter with the
touchscreen keyboard.
y You cannot set "0.0.0.0".
AutoDNS If you want the IP address of the DNS server
acquired automatically, put a check mark here.
The "DNS primary server" and "DNS secondary
server" will not be able to be set if you choose to
acquire automatically.
DNS primary Set the IP address of DNS primary server.
server Touch the text box and enter with the
touchscreen keyboard.
y You cannot set "0.0.0.0".
DNS secondary Set the IP address of DNS secondary server.
server Touch the text box and enter with the
touchscreen keyboard.
y You cannot set "0.0.0.0".
NTP server Set the IP address of the NTP server if the clock
is to be synchronised with an NTP server.
Touch the text box and enter with the
touchscreen keyboard. After setting, touch
[Update now] to start synchronising the clock.
y You cannot set "0.0.0.0".
123
Explanation
"255.255.255.255".
Continued on next page