Panasonic CZ-256ESMC3 Operating Instructions Manual page 111

10
Select the item.
Refer to P.107 for the items you can set.
z
You can select one item only.
z
10
11
Select the device name.
Put a check mark in the "Sel." column.
z
If you have selected "Rankng" as the display method and
z
"SepUnt" as the graph type, all devices are the target, so
you do not have to select.
Note
y The number of units you can select depends on the
settings for display method and graph type.
Display method
UntCmpar Up to 4
ChngPrDy 1 only
11
Graph type
Plel Cumultve
Up to 4
1 only
Graphing operating times and energy usage
12
Set the target values for the axis.
Touch [Ax1TgtVal] and enter the numbers with the
z
touchscreen numeric keypad.
A blue line is inserted to indicate the target values for the
z
graph.
You can set any goal.
z
This cannot be set if you have selected "Rankng" as the
z
display method.
13
Touch [GraphDsp].
The graph is displayed in the main screen.
z
To cancel the settings, touch [Cancel].
z
111
12
13