Reducing The Noise Of Outdoor Units [Out Unit Silent Setting] - Panasonic CZ-256ESMC3 Operating Instructions Manual

Reducing the noise of outdoor units
Set a time for the outdoor unit to operate more quietly at night compared to the day.
Note
y This is supported only by some outdoor units.
1
Touch [Energy saving] in "EnergySaving".
1
2
Touch [Out unit silent setting].
Enter the identification number (password level 1 or 2) and
z
the "Out unit silent setting" screen is displayed.
3
Put a check mark in the "Select" column
(3-1), and touch [Set.] (3-2).
The "Setting" dialogue is displayed.
z
3-
1
Note
y This is displayed only for outdoor units for which the out
unit silent setting can be set.
2
3-
2
4
Change the settings.
Item
Start time
End time
Out unit silent
5
Touch [Register].
The "Setting" dialogue closes.
z
To cancel the settings, touch [Cancel].
z
6
Set other indoor units.
Repeat steps 3 to 5.
z
87
[Out unit silent setting]
Explanation
Set the start and end times.
Use to set the time.
The setting ranges are as follows.
y Hours: 00 to 23 (1 hour intervals)
y Minutes: 00 to 59 (1 minute intervals)
Note
y You can make the settings extend over
different dates.
For example: 22:00 to 08:00
The silent operating mode is enabled if
you put a check mark here.
5
Continued on next page