5
Touch [Register].
The "Setting" dialogue closes.
z
To cancel the settings, touch [Cancel].
z
6
Set other outdoor units.
Repeat steps 3 to 5.
z
The "O/D unit demand settings" screen
A:
[Select all]/[Clear all] buttons
[Select all]
Select all outdoor units.
[Clear all]
Cancel selection of all
outdoor units.
B:
Set whether to enable outdoor unit demand
control or not.
Note
y If you select "Yes", make sure that you set
"No" for indoor unit demand settings.
C:
This switches between "Display" and
"Address" each time you touch it.
D:
The outdoor units with a check mark next to
them will be the subject of the changes to the
settings.
E:
The O/D unit demand setting is enabled for
the selected outdoor unit if you put a check
mark here. This is linked with the "O/D unit
demand Valid" ("Setting" dialogue) (P.93)
setting.
F:
The "Setting" dialogue is displayed when you
touch this.
Demand settings on the outdoor unit [O/D unit demand settings]
7
5
8
A
D
94
Select "Yes" for "O/D unit demand".
7
Touch [Register].
To cancel the settings, touch [Cancel].
z
B
E
F
8
C