Panasonic CZ-256ESMC3 Operating Instructions Manual page 165

13
Set the output delay time.
(1) Touch [OutptDlayTme].
The "OutptDlayTme" settings dialogue is displayed.
z
(2) Select the output delay time.
Set the initiating time for the output point when the input
z
point conditions have been met.
Note
y You can register a maximum of 50 event controls.
y You can register a maximum of 32 conditions each for input points and output points for each individual event.
13-
1
13-
2
165
Linked control of air conditioning units
14
Put a check mark next to "Valid".
The set event control works if you put a check mark here.
z
15
Touch [Register].
To cancel the settings, touch [Cancel].
z
14
15