Panasonic CZ-256ESMC3 Operating Instructions Manual page 117

7
Select the unit.
8
Select the type of graph.
This setting can be selected only for "Bar chart".
z
Refer to P.107 for information about types of graphs.
z
9
Set the display units for the Y axis.
(1) Touch [Ax1] or [Ax2].
The "Unit setting" dialogue is displayed.
z
9-
1
(2) Select the unit of display.
The settings are registered and the "Unit setting" dialogue
z
closes.
7
9-
2
117
10
Touch [AxsSet] to select the axis to
display.
Select the axis to display the data item.
z
The axis switches between "Ax1" and "Ax2" each time you
z
touch it.
10
11
Select the item.
Refer to P.107 for the items you can set.
z
You can select one item only.
z
If you have selected [Unit] as the display method, the items
z
are fixed so there is no need for you to set them.
11
12
Select the device name.
Setting items freely
12
Continued on next page