Check Mode; Sl-Vgu1-Ec Setting Default Values (Values Set In Our Factory Before Delivery) - Panasonic SL-VGU1-EC User Manual

SL-VGU1-EC setting default values (values set in our factory before delivery)

Setting of transmission
mode
Setting of display to decimal /
hexadecimal number display
Presetting
Setting of number of
I/O control points
I/O setting 0

CHECK Mode

Select the CHECK mode using the mode selection switch. In this mode, you can check the number of nodes
(I/O units) connected to the controller.
Operation
Pre ss
key.
Pre ss key.
Pre ss key.
Repeatedly press this key to
display addresses of all the
connected nodes.
k e y t o display the numbers in the reversed order.
Notes: 1) U s e
2) Press and hold SELECT key (
<Example> In the decimal number display mode
Number of connected
nodes (I/O units)
I/O setting 1
I/O setting 2
I/O setting 3
Output hold / clear
Setting of error 1
output operation
Description / Function
Displays the number of recognized nodes (I/O units)
connected to the controller.
Displays the addresses of the recognized I/O units in the
order of ascending numbers.
k e y o r k e y ) to switch the displayed numbers at a rapid speed.
Addresses of recognized I/O units
Starting
Setting of error 2
output operation
Setting of error 3
output operation
Setting of error 4
output operation
Setting of error 5
output operation
Decimal number Hexadecimal number
display display
42