Panasonic CZ-256ESMC3 Operating Instructions Manual page 21

Step Category step
IP address, net mask,
DHCP, etc.
9 Network related* Setting to send alarm mails
12
User ID, password,
privileges
Buzzer volume
Brightness of the back light
Auto logout time
Intelligent
10
Register PIN (Identification
controller related
number)
Initialise the days
accumulated data*
*1 Attention needs to be paid to administration divisions when devices such as systems controllers are to be used in conjunction with this unit.
*2 Settings required when area administration is to be performed.
*3 Select the object of calculations for electricity distributing from the following:
Operating hours Select when consideration is to be paid to the electricity for the indoor units. The electricity for outdoor units and indoor units are both
loaded into this unit and distributed.
Thermostat on times Select when no consideration is to be paid to the electricity for the indoor units. The electricity for outdoor units only is loaded into this
unit and distributed.
*4 If the air conditioning units included in the system are multi-function types supporting simultaneous heating and cooling or ice thermal storage models, settings
are required.
*5 Settings are required only when units are GHP with generators.
*6 Settings are required when only the accumulation operating time is to be managed.
*7 This must be set if you want to display charges.
*8 This only needs to be set for interface adaptors. (→"Interface adaptors (sold separately)" (P.224))
*9 This is used when calculating load distributing.
*10 Set items such as batch startup and stopping from external input.
*11 Set items such as batch alarm output to external devices.
*12 Required when logging in through a network device to operate and monitor.
*13 Clears the data calculated from test operation of the air conditioning units before hand over.
Setting Screen menu names
Network settings
Email settings
Web user settings
Display/Volume settings
Display/Volume settings
Display/Volume settings
Initialize
Initialize
13
Air
Reference
conditioning
page
operations
only
123

168

125

199

199

199

202

202

21
Initial settings
Operation
Distribution rate Quantity used,
display only charges display
Time Load Time Load
   
   
   
   
   
   
   
   