Panasonic CZ-256ESMC3 Operating Instructions Manual page 114

5
Touch [DispItem set].
The "DispItem set" screen is displayed.
z
6
Select how to display.
Refer to P.106 for information about how to display.
z
6
(The following explains using examples as if "ItemUnts" was selected)
7
Select the unit.
Refer to P.106 for information about units.
z
5
7
8
Select the type of data.
Refer to P.107 for information about types of data.
z
If you have selected [days] for the display period, this is
z
not set.
8
9
Select the item.
Refer to P.107 for the items you can set.
z
You can select one item only.
z
If you have selected [By unit] as the display method, the
z
items are fixed so there is no need for you to set them.
9
10
Select the device name.
You can set the device name for only one device.
z
If you have selected [ItemUnts] as the display method, you
z
can set up to 4 device names.
114
Graphing temperature changes
10
Continued on next page