Panasonic CZ-256ESMC3 Operating Instructions Manual page 211

Item
Chattering cancel Set the time until cancelling when chattering
time (msec) occurs.
6
Touch [NextPage →].
The "Settngs for communictn w A/C(3)" screen is
z
displayed.
To return to the "Settngs for communictn w A/C(1)" screen,
z
touch [← PrevPage].
If you touch [Cancel], all the settings up to that point are
z
cancelled.
7
Change the settings.
Item
AlrmLog outp Select whether to output alarm logs.
Alarm mails are not sent if the check mark is
removed.
You can select only the following checks and
alarms. Others are executed irrespective of the
setting.
y InspcnSign:
Filter sign
Engine oil check
Remote controller display check
y ComError:
C17 alarm (communication error between
the unit and the air conditioning unit)
C06 alarm (communication error between
the unit and the communication adaptor)
Local R/C Prhbt Set "Prbt1" to "Prbt4" for each item ("ON/OFF",
settings "Temp. setngs", "Mode", "Fan SPD", "Flap", or
"Energy saving") to set whether to permit or
prohibit operations and settings with the local
remote controller.
Each time you touch either "" or "" is
displayed.
y "": Operation and setting with the local
remote controller is enabled
y "": Operation and setting with the local
remote controller is prohibited
Touch [InitlSet] to restore the default factory
settings.
Explanation
Explanation
211
Setting communications with air conditioning units
8
Touch [Register].
All of the settings are registered.
z
If you touch [Cancel], all the settings up to that point are
z
cancelled.
8