Table of Contents
Advertisement
The "Distribution data" screen
A:
Set the units of display.
[Area]
Display indoor units by area.
[I/D unit]
Display indoor units in display
order.
B:
Set the periods to be displayed. The
"Calendar" dialogue is displayed when you
touch this.
C:
Set the time slots to be displayed. The
"Specify time" dialogue is displayed when
you touch this.
D:
Indoor unit distribution data is displayed in
a list.
Item
Name
Subt
Area
Dstr
Elec. ratio (%)
Elec. usage (kWh)
Elec. cost
O/D Gas ratio(%)
O/D Gas usage(m3)
O/D Gas cost
PwrGnGas ratio(%)
PwrGnGas usage(m3)
PwrGnGas cost
Total cost
E:
The "PwrGnGas ratio", "PwrGnGas usage", and "PwrGnGas cost" items are added to the display when you touch this. This is not
possible if time distribution is set, however.
F:
Display by area or by distribution group. (Factory setting: ON)
When this is cancelled, it is possible to display by area or by indoor unit. (→ "Changing the units of display" (P.74))
A
D
The names of the indoor units are displayed.
This is the subtotal of the specified unit.
The area number that the indoor unit belongs to is displayed.
The distribution group number is displayed.
This is the distribution ratio of electricity supplied from outdoor units.
This is the usage of electricity supplied from outdoor units.
This is the charges calculated based on the electricity usage.
This is the distribution ratio of gas supplied from GHP.
This is the quantity of gas supplied from GHP.
This is the charges calculated based on the gas usage.
This is the distribution ratio of gas used to generate power.
This is the volume of gas used to generate power.
This is the charges calculated based on the volume of gas used to generate power.
This is the total of "Elec. cost", "O/D Gas cost", and "PwrGnGas cost".
75
Checking distribution data in a list
B
Explanation
C
E
F
- Quick Links:
- Troubleshooting
Hide quick links:
Advertisement
Table of Contents
